全封閉晶棒XY軸X射線定向粘料儀

ALW-XYDZ 700A 型全封閉晶棒XY軸X射線定向粘料儀

ALW-XYDZ 700A MODEL CLOSED SHIELD STICKING INGOT X-RAY INSTRUMENT BY X&Y AXIS

產品特點

ALW-XYDZ 700A 型全封閉晶棒XY軸X射線定向粘料儀為全封閉式雙工作臺，左側工作臺在X光下對（2~6）英寸藍寶石晶棒X軸定向，晶棒長度zui短為20mm，全封閉晶棒XY軸X射線定向粘料儀利用導軌滑動在一塊料板上，粘結多塊晶棒；右側工作臺在X光下利用工具對（2~6）英寸藍寶石晶棒Y軸角度定向，然后將晶棒和夾具一起放到磨床進行參考面的玻璃面進行磨平、加工.儀器定向粘結精度±15"/30"，zui小讀數1"，具有差值顯示功能。

Features

The instrument is the whole closed type worktable, the left workbench can adhesive 2~6 inches sapphire ingot with the X-ray orientation unit,the minimum length of ingot is 20mm,and use the guide's glid to adhesive more ingot at a piece flitch ; The right workbench can test the end plane angle of 2~6 inches sapphire ingot or wafer with the X-ray orientation unit, wiht accuracy ±15"/30", the minimum reading by 1". Has the difference display function.

技術指標

●輸入電源：單相交流220V，50Hz，0.25kW。

●X射線管：銅靶，風扇冷卻，陽極接地。

●zui大管電壓電流：30kV，5mA連續可調，使用2.0mA以上，

                   有可能損壞X光管并加大輻射危害。

●探測器：計數器。工作電壓zui高為DC1000V；或閃爍探測器,

                  工作電壓zui高為DC1200V。

●時間常數：1（快）、2（慢）兩檔。

●測角范圍：2θ=－10°～110°，θ=－5°～55°

●角度讀數：數字顯示以度、分、秒表示，zui小讀數為1″。

            數字顯示以度、分、秒表示，帶差值，zui小讀數為1″。

            數字顯示以度顯示，zui小讀數為0.001°。

            數字顯示以度表示，帶差值，zui小讀數為0.001°。

●角度調整：數位顯示可予置在任何角度上。

●主光閘：自動。

●防護罩：全封閉防護。

●顯示板：角度顯示，射線強度表。

●綜合精度：雙衍射型綜合精度±15″或±30″。（用標準石英片測量）。

●外型尺寸：1132（長）×642（寬）×1460（高）mm

●重量：300kg

Technical Parameters

●Input power:Single phase with AC 220V,50Hz,0.25kW

●X-ray tube : Cu target ,cooled by fan ,and anodes earth

Max.tube voltage and current: 30kV, 5mA, being continued adjustment .If using the current is more than 2.0mA ,which may damage the X-ray tube inserted and enlarge the radiative harm

●Detector: counter . The max. working voltage is DC1000V;Or scintillation counter,the max.working voltage is DC1200V

●Time set : 1(fast)/2(slow)

●Angle range: 2θ=－10°～120°，θ=－5°～60°

●Angle reading : Digital displaying in degree ,minute and second, the minimum reading to 1"

  Digital displaying in degree, minute and second,  with the difference value ,the minimum reading to 1"

  Digital displaying in degree ,the minimum reading to 0.001°

Digital displaying in degree , with the difference value ,the minimum reading to 0.001°

●Angle adjustment: Digital displaying can be set in the any angle.

●Main shutter :auto

●Shield: totally close

●Displaying board: Angle displaying, and Ray intensity table

Comprehensive precision: double diffraction comprehensive accuracy±15″or±30″.(Measured with standard quartz ).

●External dimension :1132(L) ×642（W）×1200（H）mm

●Weight:300kg